ELECTRIC INSTANT HEATER 5000W GEYSER – ELECTRIC SHOWER & SINK CONFIGURATION

Efficient 5000W electric instant water heater for shower and sink. Delivers hot water on demand with compact design, energy-saving performance, and easy installation. Ideal for homes, offices, and small spaces.

Plumbing Setup

Option A: Single Point

• One output either for shower or sink.
• Fast and cost-effective.
• Not simultaneous use.

Option B: Multipoint Configuration

• Connect to both shower and sink, possibly using diverter valves.
• May not support simultaneous use due to power limitations.
• Install flow restrictors to manage pressure and temperature at each outlet.

💧 Water Flow & Temperature

• Instant heaters like this require a minimum flow rate to activate.
• At 5000W, expect moderate temperature rise:
• Incoming water at 15°C may reach ~40°C at 2-3 L/min.
• Low flow = higher temperature, high flow = cooler water.

——————————————————————————————————————————-

• Instant boilers heat water directly, without using a water storage enclosure
• When the faucet is open, cold water flows through a hose to the unit
• An electric resistance heats the water. As a result, instant boilers constantly supply hot water
• You don’t have to wait for a tank to be filled with water and then heated
• The accessories delivered together with the device are imperative enough for the correct operation of the device
• The water heating circuit is made of sanitary approved components (they are not corrosive and do not contain toxic components)
• In the event of over-temperature and in the event of an accidental drop in the water supply flow, (thermolimiter and pressure switch with double contact)
• Adjustable from the supply tap, depending on the desired inlet and outlet water temperature, respectively the selected heating level
• Protection against electric shock